Louisville's Gun Store
A Whole Lot of Firepower in a Hard to Find KelTec
Pew. Pew. Pew pew pew pew pew pew pew pew pew pew pew pew pew pew pew pew pew pew. Pew pew pew pew pew pew pew pew pew pew pew.
That’s what it will sound like when you go plinking or varmint hunting with the hard-to-find KelTec PMR-30 – a 30-round capacity pistol chambered for the .22WMR round.
The PMR-30 is a light weight, full size pistol chambered for the flat-shooting .22Magnum cartridge (.22WMR). The PMR-30 operates on a unique hybrid blowback/locked-breech system. This operation system allows for the use of a wide variety of ammunition as it seamlessly adjusts between locked breech and blowback operation, depending on the pressure of the cartridge. It uses a double stack magazine of a new design that holds 30 rounds and fits completely in the grip of the pistol. The trigger is a crisp single action with an over-travel stop. The manual safety is a thumb activated ambidextrous safety lever (up for SAFE, down for FIRE). The slide locks back after the last shot and a manual slide lock lever is also provided. The light, crisp trigger pull and fiber optic sights make the PMR-30 ideal for target shooting and hunting small game.
Slide and barrel are 4140 steel, frame is 7075 aluminum. Grip, slide cover, trigger, mag release, and safety levers are glass reinforced Nylon (Zytel), much like other Kel-Tec Pistols. Magazine is Also Zytel and holds 30 rounds, with round count ports. Other features include: dual opposing extractors for reliability, heel magazine release to aid in magazine retention, dovetailed aluminum front sight, Picatinny accessory rail under the barrel, Urethane recoil buffer, captive coaxial recoil springs. PMR30 disassembles for cleaning by removal of a single pin.
$599.99 at Gunz Inc. 5616 Barrett Lane in Valley Station. Ammo not included.
| Calibers: | .22 Magnum | (.22WMR) |
| Weight unloaded: | 13.6oz. | 386g |
| Loaded Magazine: | 6oz. | 170g |
| Length: | 7.9″ | 201mm |
| Height: | 5.8″ | 147mm |
| Width: | 1.3″ | 33.0mm |
| Barrel length: | 4.3″ | 109mm |
| Sight radius: | 6.9″ | 175mm |
| Energy (40gr): | 138ft-lbs | 187J |
| Capacity: | 30 + 1 rounds | |
| Trigger pull: | 4-6 lbs | 17.8-26.7N |
Kel-Tec KSG Shotguns in Your Choice of Colors
Gunz Inc. has had a few KSGs come though, but most of them have followed Henry Ford’s adage that you can have them in any color you like… as long as it’s black. But now you can mix it up a bit by choosing the all-black model or the two-tone model with satin silver finish and black furniture.
The KSG (Kel-Tec Shotgun) is Kel-Tec CNC’s first entry into the shotgun market. The size, shape, and design is similar to the currently available Kel-Tec RFB rifle, but the KSG ejects downward, instead of forward. The KSG weighs 6.9 lbs. and is as compact as legally possible with a 26.1” overall length and an 18.5” cylinder bore barrel. Even with this compact size, the internal dual tube magazines hold an impressive 12 rounds of 12 gauge 3” rounds in total (6 per tube). It can also reliably shoot shells as short as 1 3/4″ up to the 3″.
This simple and reliable pump action feeds from either the left or right tube. The feed side is manually selected by a lever located behind the trigger guard.
The pump includes an under picatinny rail for the mounting of a forward grip, a light, or a laser. The included top picatinny sight rail will accept many types of optics or iron sights. Forward and rear sling loops are built in, and a basic sling is included. The soft rubber butt pad helps to tame recoil.
The KSG receiver is made from hardened steel and includes the magazine tubes which have been welded in place. The grip and stock assembly is made of glass reinforced nylon (Zytel) and is easily disassembled by pushing out 2 pins, which store in 2 holes in the grip when removed. The barrel and pump assembly is removed by loosening the 2 front magazine tube nuts with a coin and sliding the assembly forward.
