Valley Station – Louisville, KY
Gunz, Inc.
10970 Dixie Highway
Louisville, KY 40272

M-Sat 10AM-6PM
Closed Sundays

New Guns from KelTec In Stock at Gunz!

Check out these great deals on some great guns.

First up are some pistols perfect for CCDW.

IMG_5319The P11 ($259.99) is a semi-automatic, locked-breech, DAO, pistol, chambered for the 9mm Luger cartridge. Ten round and optional twelve round magazines available. The Kel- Tec P-11 is compact and lightweight, thanks to its locked breech. Its ergonometry, perceived recoil and practical accuracy are comparable to much larger guns. The P-11 is especially well suited for plain-clothes police officers, security personnel, or as a secondary weapon for military service members.

The P-11 has six main component groups: barrel, slide, frame, firing mechanism, grip, and magazine. The barrel is made of SAE 4140 Ordnance steel heat treated to 47 HRC. The slide is also 4140 steel, and contains the firing pin and the extractor. The rectangular frame is machined from solid 7075-T6 aluminum and houses the firing mechanism. The trigger connects via a transfer bar to the hammer and operates in Double Action Only. The hammer is driven by a novel free floating extension spring. The light weight firing pin transmits the energy of the hammer to ignite the primer. The functioning of the mechanism surpasses all applicable SAAMI safety standards. The grip is made of the ultra high impact polymer DuPont ST-8018. The grip also forms the magazine well and the trigger guard. Normally supplied with a 10-round double column all steel magazine.

IMG_5309The PF-9 ($260) is a semi-automatic, locked breech pistol, chambered for the 9mm Luger cartridge. It has been developed from our highly successful P-11 and P-3AT pistols with maximum concealability in mind. The PF-9 has a single stack magazine holding 7 rounds. It is one of the lightest and flattest 9 mm ever made. Firing mechanism is Double-Action Only with an automatic hammer block safety. The PF-9 is available in blued, parkerized, and hard chrome finishes. Grips are in black, grey, and olive drab.

The PF-9 retains the best features from our P-11 and P-3AT pistols combined into the flattest and lightest single stack 9mm configuration ever made. The barrel, locking system, slide stop, assembly pin, front sight, recoil springs and guide rod are adapted from the P-11. The PF-9 is nearly identical to the P-11 in length and height and shares the same exterior controls. The shorter trigger system with integral hammer block and the extraction system are adapted from the P-3AT. Just like the P-11, the PF-9 will accept +P ammunition, however, not with continuous use.

The rear sight is a new design and is adjustable for windage with the supplied allen wrench as well as for elevation with the use of shims (not included). The included 7 round rectangular magazine is supplied with a finger extension base plate and numbered holes. The under barrel accessory rail shares the dimensions of the MIL-STD-1913 picatinny rail although there is only one locking notch in the forward position.

IMG_5321The P-3AT ($249.99) is a semi-automatic, locked breech pistol, chambered for the .380 Auto cartridge. It has been developed from our highly successful P-32 pistol with negligible increase in weight and size. The slidestop has been eliminated and the magazine capacity reduced to 6 rounds due to the larger cartridge. The firing mechanism is double action only. The magazine has a 6 round capacity. The KEL-TEC P-3AT is the lightest .380 Auto pistol ever made. Thanks to its locking dynamics and superior ergonometry, perceived recoil and practical accuracy are comparable to much larger guns. The P-3AT is mainly intended for plainclothes police officers as a secondary weapon, or for concealed carry by licensed citizens. The small grip size and light trigger pull make the P-3AT ideal for female shooters.

The P-3AT has five main component groups: barrel, slide, firing mechanism, grip, and magazine. The barrel is made of SAE 4140 ordnance steel, heat treated to 48 HRC. The slide is also 4140 steel, and contains the firing pin and the extractor. The rectangular frame is machined from solid 7075-T6 aluminum and houses the firing mechanism. The trigger connects via a transfer bar to the hammer. The hammer is driven by a novel free floating extension spring. The light weight firing pin transmits the energy of the hammer to ignite the primer. After firing, the hammer block holds the hammer away from the firing pin, providing a mechanical safety.

The Sub-2000 Gen 2 .40 S&W for Glock Mags ($499.99) is a semi-automatic rifle chambered for the 9mm Luger or the .40 cal. S&W cartridge. Different versions of the SUB-2000 rifle will accept most double column handgun magazines (see list below).  By rotating the barrel upwards and back, the SUB-2000 rifle can instantly be reduced to a size of 16.25 x 7 inches for ease of storage.

The polymer of the weapon is made of an impact modified glass reinforced Zytel.  Two integrated Picatinny rails come standard on the SUB-2000 forend for mounting compatible accessories.  The forend also includes five mounting slots per side, configured for various M-LOK accessories.

The stock can be adjusted to three different positions for shooter’s comfort.  Each position adds approximately 5/8 of an inch to the overall length of the weapon, with a total extension of 1.25 inches in the further rearward position.  The stock includes a single point sling loop attachment, a slot for adding a nylon sling loop (1.25″ wide is ideal), and a Picatinny rail on the bottom for adding small accessories.

The SUB-2000 features a push-bolt safety located behind the trigger on the grip assembly.  The bolt can be locked in the rear position by cycling the bolt to the rear and rotating the operating handle up into the cutout on the receiver.  The rear sight is of aperture type and the AR style front sight can be adjusted for windage and elevation.

The thread protector on the SUB-2000 is removable, if the shooter desires to replace the thread protector with a compatible accessory for the 9/16″-24 threads (.40 cal S&W).  The SUB-2000 can easily be disassembled for cleaning or inspection without tools.

Leave a Reply

Your email address will not be published. Required fields are marked *

Copyright © 2015. All Rights Reserved.